11 4 120.01 4B00005 LH 0 CORESTLH 9 0 500 95069990 -8--11- ACCESSORIES for Bows > Rest 4 • Horizontal and vertical movement without any fixation screw. The rest can be adjusted without loosening or tightening any screw! • Highest precision, thanks to a revolutionary concept: the rest can be adjusted without tolerances and play, with a precision not known until today. • Re-produceable settings: both the vertical and the horizontal millimetric scale have a Vernier scale (like a caliper). Thanks to that, the Rest can be adjusted with a precision of 0,2mm! The setting can be reproduced, resulting in the arrow rest to have zero play.- the launcher can be set in 2 different angles - 30° or 35° - by changing two little blocks. So the angles can be re-set precisely. • Guidance plates with bulge: plates with different lengths can be installed on top and bottom of the launcher. These will change the stiffness of the launcher and avoid any oscillation after the shot, which most of the time is the reason of bad clearance. The bulge on the plates gives the launcher the chance to follow the horizontal path of the arrow leaving the bow. • Stainless steel 5/16“-24 screw with flat head and large diameter. The Spacer made out of a special plastic allows to fix the screw better. A counter screw with an elastomer pad avoids any marking on the bow handle. • Different launcher sizes and thicknesses will be available to fit various arrow diameters and weights. • the profile of the arrow rests mounting block may not fit every handle (at the moment the Hoyt Carbon Matrix is the only bow not accepting the rest) • Includes: 1 Beiter Compound Rest with 2 launchers, including 2 inclination blocks (30°, 35°) 1 hex wrench for horizontal and vertical settings 1 stainless steel screw 5/16“-24 with spacer and a counter screw with elastomer pad 1 set of guidance plates with bulge: 22, 26, 30mm Rest Compound Rest LH - Black Compound Rest - LH - Black - Beiter - - -

11 4 5.58 4B00006 BOTH 0 CO5030 9 0 25 95069990 -8--11- ACCESSORIES for Bows > Rest 4 Rest Launcher 5mm 0,30mm Launcher 5mm - 0,30mm - Beiter - - -

45 4 9.61 9B0000A Plastic BOTH 0 RIPCLUTCH43 9 0 350 95069990 -8--45- ACCESSORIES for Bows > More Stuff 9 One part is screwed onto your work bench, the other attaches to your stabilizer bushing • Connect the two together to hold your bow at an angle The best easy way to put your bow in a rapid rack or to work on it in safety. More Stuff RIP CLUTCH Black RIP CLUTCH - Black - Beiter - - -

37 4 48.45 BL80022SW 6B00001 0 BL80022SW 9 0 350 95069990 -8--10--37- ACCESSORIES for Bows > Stabilizer > Offset, Side Mounts & V-Bar 6 NEW Beiter-Lock V-BAR with 2 Conical Adapter 26/22mm to attach on the bow with your classic screw OR buying the 27mm V-lock connector for the Long stabilizer Offset, Side Mounts & V-Bar V-Bar - Beiter-Lock 80°x0°, Black, Beiter-Lock 26/22 V-Bar - Beiter-Lock - 80°x0°, Black, Beiter-Lock 26/22 - Beiter - - BL80022SW -

37 4 23.97 BLAD27SA22 6B00002 0 BLAD27SA22 9 0 250 95069990 -8--10--37- ACCESSORIES for Bows > Stabilizer > Offset, Side Mounts & V-Bar 6 NEW Beiter-Lock Adapter for V-BAR, complete, 26/22 2Pc 24,7 1 49,4 2Conical Adapter 26/22mm and Thread Adapter 27mm This is good to use with a V-bar Offset, Side Mounts & V-Bar V-Lock Adapter complete, 26/22mm, 27mm V-Lock - Adapter complete, 26/22mm, 27mm - Beiter - - BLAD27SA22 -

45 duplicated by 24577 4 48.40 9B0000C RH 0 MIKL49BKR 9 0 250 95069990 -8--45- ACCESSORIES for Bows > More Stuff 9 Archers are always looking to have the correct draw length. The Beiter MicroKlicker not only helps to find the exact and correct draw length but also to adapt the draw lenght micrometrically if needed... and go back to the original! One Klick is 0,125mm (0,005")! Big advantage: the angle of the Klicker does not change when moving the MicroKlicker with the adjustment knob. On the Beiter MicroKlicker the angle can be set and changed in steps of 7,5°! This is possible thanks to the new design. WITHOUT KLICKER BLADES!! WITHOUT KLICKER BLADES!! WITHOUT KLICKER BLADES!! More Stuff MICROKLICKER BASCI KIT, short 49mm MICROKLICKER - BASCI KIT, short 49mm - Beiter - - - duplicated by 24577

24 duplicated by 18650 4 12.50 NO451X80 NB0001D 0 NO451X80 9 0 50 95069990 -2--24- ARROWS > Nocks N This is the new nock fopr X10 Recurve. This new nock is the classic Out Nock, but can fit on an X10 with Pin. The lenght is the same of the 4.5 Out for x10, so no change on clicker lenght. Is a good option if your shaft is a little "soft" during tuning. Nocks Nock 4.5/1 X (x25) Purple #80 Nock 4.5/1 X (x25) - Purple #80 - Beiter - - NO451X80 - duplicated by 18650

45 4 6.19 9B00001 0 KL632A25SW 9 0 150 95069990 -8--45- ACCESSORIES for Bows > More Stuff 9 The Beiter Klicker has been used and appreciated since its introduction, thanks to the fact that it suits almost all Handles on the market, due to the different available models. Different colours of the Klicker Blade and many different components can individually adapt the Klicker to the archer's needs. More Stuff Clicker, 6-32A 0.25mm, SILVER BLADE - Black parts Clicker, 6-32A - 0.25mm, SILVER BLADE - Black parts - Beiter - - -

24 4 12.50 NB0000W 0 NO0X135 9 0 50 95069990 -2--24- ARROWS > Nocks N Nock made for Easton X10 (all spine), but no for Easton X10 Protour. ONLY HEAVY COLOURS (no transparent) Nocks Nock In-Out 0X1 (x25) Orange #35 Nock In-Out 0X1 (x25) - Orange #35 - Beiter - - -

54 4 59.87 9B00004 0 PL6523.0DB 9 0 150 95069990 -8--54- ACCESSORIES for Bows > Plunger 9 The Beiter Plunger, developed 1985 to 1986, was introduced at the Las Vegas Shoot 1987. Actually it is represented on archery fields world wide. Since 1992 all Olympic Medallists used Beiter Plungers as well as over 80% of all competing archers! The Beiter Plunger is produced out of precision machined parts (the Beiter company supplies the watch-, precision-mechanic- and medical industry and is used to work only with the finest materials). The notching scale cylinder allows an exact and reproducible spring tension time after time. The thread cylinder is made out of high-grade refined steel, the springs out of stainless harmonic steel, the notching scale cylinder and the slotted nut out of anodised aluminum. The material used for the Plunger Pin offers excellent glide- and wear-behaviour by using aluminum-, aluminum-carbon- or carbon-arrows. Plunger Plunger, 5/16"-24 17.5-23.0mm, Darkblue Plunger, 5/16"-24 - 17.5-23.0mm, Darkblue - Beiter - - -

24 4 15.52 NB00005 0 PINH35 9 0 50 95069990 -2--24- ARROWS > Nocks N Nocks Pin Nock Symmetric Hunter (x25) Heavy Orange #35 Pin Nock Symmetric Hunter (x25) - Heavy Orange #35 - Beiter - - -

24 4 11.00 NB0000N 0 NO45110 9 0 50 95069990 -2--24- ARROWS > Nocks N Nocks Nock 4.5/1 (x25) Red #10 Nock 4.5/1 (x25) - Red #10 - Beiter - - -

35 duplicated by 10906 4 1.06 HB00008 0 NO77132OR 9 0 100 95069990 -35- ACCESSORIES for Archers H ACCESSORIES for Archers Nockdepot for #2 Nocks Orange Nockdepot for #2 Nocks - Orange - Beiter - - - duplicated by 10906

35 4 1.06 HB00006 0 NO7713HGR 9 0 100 95069990 -35- ACCESSORIES for Archers H ACCESSORIES for Archers Nockdepot for Hunter Nocks Darkgreen Nockdepot for Hunter Nocks - Darkgreen - Beiter - - -

49 4 2.63 2B00005 0 SCEWW7GR 9 0 150 95069990 -8--47--49- ACCESSORIES for Bows > Scope > Scope accessories 2 Scope accessories Level Ø7mm for Scope 39 Green Level Ø7mm for Scope 39 - Green - Beiter - - -

35 4 3.12 HB00007 0 WA0401GE 9 0 100 95069990 -35- ACCESSORIES for Archers H ACCESSORIES for Archers Limb Line Gauge for Recurve Yellow pairs Limb Line Gauge for Recurve - Yellow pairs - Beiter - - -

35 4 0.98 HB00005 0 NO7705H 9 0 100 95069990 -35- ACCESSORIES for Archers H ACCESSORIES for Archers Push'n'Pull for Hunter-Nock Push'n'Pull - for Hunter-Nock - Beiter - - -

35 4 2.58 HB00002 0 SERVINGCLIP 9 0 100 95069990 -35- ACCESSORIES for Archers H ACCESSORIES for Archers Serving Shifter #2 & Tool Clip Serving Shifter - #2 & Tool Clip - Beiter - - -

47 4 7.38 2B0000W Plastic BOTH 0 VT88SW 9 0 300 95069990 -8--47- ACCESSORIES for Bows > Scope 2 The Beiter rECURVE Sight Tunnel 08mm was the first Sight Tunnel designed by Werner Beiter. It can be combined with seven interchangeable inserts - all showing different aiming options With the aid of the Sight-Pin Tool the inserts can easily be replaced. Pack Includes: Sight Tunnel 1 Sight Pin Tool 1 Insert #2 Red 1 Insert #5 Black Available in: 8/32 Scope Sight-Tunnel diam. 8mm, #8-32, Black Sight-Tunnel - diam. 8mm, #8-32, Black - Beiter - - -

35 4 2.98 HB00001 0 STRINGCLIP 9 0 100 95069990 -35- ACCESSORIES for Archers H ACCESSORIES for Archers String&Clip Tool #1, Black, 9,5mm String&Clip Tool - #1, Black, 9,5mm - Beiter - - -

35 4 20.13 HB00004 0 TL7503BL 9 0 250 95069990 -35- ACCESSORIES for Archers H The Historic Tri liner from Beiter helped since 90' years, generation of archers to find the good place to attach the Spin Wing Vanes. Easy, Durable and Light, is easy to bring on the field. ACCESSORIES for Archers Tri-Liner Blue Tri-Liner - Blue - Beiter - - -

35 4 20.80 HB00003 0 WIBL 9 0 120 95069990 -35- ACCESSORIES for Archers H The Beiter winder was developed in several years of testing. One of the aims, was to design an efficient tool to be easily used by professionals or beginners.Not only it is important that a serving tool simply serves the yarn on a string: it is much more important, HOW this is done! The yarn must have a smooth guidance; friction and tension must be adjusted extremely fine. This is possible thanks to the Beiter WINDER. A unique feature of the Beiter WINDER is also that the yarn must not be threaded through an eye: thanks to an innovative slot you have only to clip in the yarn! Another unique property of the Beiter Winder is that you can change the spool within seconds. ACCESSORIES for Archers Winder Blue Winder - Blue - Beiter - - -

49 4 4.16 2B00008 0 SC39WSSW 9 0 50 95069990 -8--47--49- ACCESSORIES for Bows > Scope > Scope accessories 2 This is one of the most selled Product by Beiter. Is a very easy to install Weather Shield, good for Sun or Rain. Is easy to install on scope 39mm is very elastic. Scope accessories Weathershield Black for 39mm Weathershield - Black for 39mm - Beiter - - -

47 duplicated by 10873 4 77.83 2B0000D Plastic RH 0 9 0 300 95069990 -8--47- ACCESSORIES for Bows > Scope 2 Scope Scope Ø39 Clear, +0,75 Scope Ø39 - Clear, +0,75 - Beiter - - - duplicated by 10873

49 4 5.41 2B00007 0 SC7677FKSW 9 0 150 95069990 -8--47--49- ACCESSORIES for Bows > Scope > Scope accessories 2 Scope accessories Scope Pin Colour-Kit Black Scope Pin Colour-Kit - Black - Beiter - - -

49 4 2.25 2B00009 0 SC7716FKSW 9 0 150 95069990 -8--47--49- ACCESSORIES for Bows > Scope > Scope accessories 2 Scope accessories Rings for Scope Pin Black 1each .Ø8/Ø6 , Ø10/Ø8 , Ø12/Ø10 Rings for Scope Pin - Black 1each .Ø8/Ø6 , Ø10/Ø8 , Ø12/Ø10 - Beiter - - -

49 4 2.63 2B00004 0 SCEWW6721RT 9 0 150 95069990 -8--47--49- ACCESSORIES for Bows > Scope > Scope accessories 2 Scope accessories Level for Scope Ø29 Red Level for Scope Ø29 - Red - Beiter - - -

10 4 28.14 3B00004 12 0 CE12G5SWPE 9 0 2000 95069990 -8--10- ACCESSORIES for Bows > Stabilizer 3 Stabilizer Centralizer 12", Weightadapter 5/16", "Black Pearl" Centralizer - 12", Weightadapter 5/16", "Black Pearl" - Beiter - - -

11 4 5.58 4B00003 BOTH 0 CO4025 9 0 25 95069990 -8--11- ACCESSORIES for Bows > Rest 4 Rest Launcher 4mm 0,25mm Launcher 4mm - 0,25mm - Beiter - - -

24 4 11.00 NB0000Q 0 NO192H30 9 0 50 95069990 -2--24- ARROWS > Nocks N Nocks Nock 19/2 Hunter (x25) Orange #30 Nock 19/2 Hunter (x25) - Orange #30 - Beiter - - -

47 4 71.40 2B00002 Plastic RH 0 SC10RKL075KGRKL 9 0 300 95069990 -8--47- ACCESSORIES for Bows > Scope 2 Green/Clear Level Scope Scope 29 K-Lens #10-32, Clear, +0,75 Scope 29 K-Lens - #10-32, Clear, +0,75 - Beiter - - -

24 4 12.50 NB0000X 0 NO0X257 9 0 50 95069990 -2--24- ARROWS > Nocks N Nocks Nock In-Out 0X2 (x25) Green #57 Nock In-Out 0X2 (x25) - Green #57 - Beiter - - -

46 4 2.40 3B00002 0 VBOXGP3026 9 0 100 95069990 -8--10--46- ACCESSORIES for Bows > Stabilizer > Damper 3 Damper V-BOX Baseplate 30-26x7mm, 3 pcs. V-BOX - Baseplate 30-26x7mm, 3 pcs. - Beiter - - -