HSN: 95069990 (Games and Sports Requisites)
CGST: 2.50% - SGST: 2.50% - IGST: 5%
Internal Code: 3Z0001E
Carbon Construction
Ultra high modulus carbon fiber layup
Diameter
Front stabilizers
0.60” base tapering to 0.53” tip
Side stabilizers
0.57” base tapering to 0.53” tip
The Wind Taper profile increases stiffness where the stabilizer experiences the most stress while reducing drag at the tip where wind torque is greatest.
This geometry also improves vibration reduction compared to a parallel carbon tube.
Stiffness
C-Spine: 440
Recommended weight range
Front stabilizer: 3–20 oz
Side stabilizer: 3–30 oz
The Vektor 2 sits between the Ultra and Beast in overall stiffness, making it one of the most versatile stabilizers in the RamRods lineup.
An optional Vektor 2 S version measures 380 C-Spine, providing over 13% additional stiffness for compound athletes who run heavier weight systems.
Side rods are not offered in the S version because shorter stabilizers already provide high stiffness and the performance gain does not justify the additional cost.
End Caps
EDGE aerospace grade aluminum
The redesigned end caps maximize strength at the base of the stabilizer while minimizing weight at the tip. This increases natural frequency and improves aiming responsiveness.
A deeper overlap between carbon and aluminum also increases durability.
Threads
5/16-24 threaded ends
Compatible with standard stabilizer weights, dampers, and conversion screws.
Stabilizer Mass (without weights)
10” – 2.2 oz
11” – 2.4 oz
12” – 2.5 oz
13” – 2.6 oz
14” – 2.7 oz
15” – 2.9 oz
26” – 4.4 oz
27” – 4.5 oz
28” – 4.7 oz
29” – 4.8 oz
30” – 4.9 oz
32” – 5.2 oz
Tungsten VIBRO-Core option adds 2 oz
Note: Stabilizer lengths are measured from end cap to end cap and do not include additional hardware, weights, or dampers.